91�ȱ�

Lathes are machines for turning and forming materials. This is usually done by removing material to form a shape, or drilling and cutting to create threads.

Wood lathes

The lathe is driven by a motor that rotates a blank of wood between two centres – the fork centre and the centre – that hold it in place. The machine rotates the wood and the user uses a variety of chisels to shape the wood by moving the chisels along a tool rest.

Tools

Lathes feature the following kinds of tools: -

• Gouge – scooped in shaped and is used for removing material and rough cutting of the material
• Parting – used for creating inserts, notches or grooves in the workpiece
• Scraper – used to smooth the shape before finishing. These can be either square or round
• Skew – used to create more detailed shapes and grooves

Metal lathes

A metal lathe is like the wood lathe in the type of shapes it can produce but for designed to work on metals. Due to the material the machine is more controlled. The machine is driven by motor that rotates a blank of metal on chuck. The machine rotates the metal and cutting tool moves in different directions to shape metal.

Types of processes involved in metal lathe manufacturing: -

• Facing off – this when the end of a metal bar is cut level so the end is flat
• Parallel – this when the cutting tool cuts parallel to the centre to reduce the outside diameter
• Chamfer – this is when the cutting tool cuts an angle or taper
• Parting – this is when the cutting tool cuts a notch or groove or can completely cut through the work piece to separate it from the rest