Household electricity
Plugs
A plug connects a device to the mains electricity supply. The cable between the device and the three-pin plug contains three copper wires that are coated with plastic.
- copper wires are good An electrical conductor is a material which allows an electrical current to pass through it easily. It has a low resistance.
- plastic is a good Material that does not allow charge or heat to pass through it easily.
Each part of the plug has a function.
| Features of a plug | Function |
| Outer insulation | All three wires in the cable are bundled together and there is extra plastic insulation wrapped round them all for safety |
| Cable grip | This holds the cable tightly in place so that wires do not become loose |
| Live wire | Copper wire coated with brown plastic along which the current enters the device |
| Fuse | A glass or ceramic canister containing a thin wire that melts if the current gets too high |
| Neutral wire | Copper wire coated with blue plastic that also connects to the cable in the wall and completes the circuit |
| Earth wire | Copper wire coated in striped plastic that provides a path for current to flow from the case of the device to the ground if there is a fault |
| Features of a plug | Outer insulation |
|---|---|
| Function | All three wires in the cable are bundled together and there is extra plastic insulation wrapped round them all for safety |
| Features of a plug | Cable grip |
|---|---|
| Function | This holds the cable tightly in place so that wires do not become loose |
| Features of a plug | Live wire |
|---|---|
| Function | Copper wire coated with brown plastic along which the current enters the device |
| Features of a plug | Fuse |
|---|---|
| Function | A glass or ceramic canister containing a thin wire that melts if the current gets too high |
| Features of a plug | Neutral wire |
|---|---|
| Function | Copper wire coated with blue plastic that also connects to the cable in the wall and completes the circuit |
| Features of a plug | Earth wire |
|---|---|
| Function | Copper wire coated in striped plastic that provides a path for current to flow from the case of the device to the ground if there is a fault |
Learn more on domestic uses and safety in this podcast
Listen to the full series on 91热爆 Sounds.
Earthing
Without the earth wire, if a fault occurs and the live wire becomes loose, there is a danger that it will touch the case. The next person who uses the appliance could get Cause injury or death by an electric shock..
The earth wire is therefore connected to the case and is attached to a metal plate or water pipe underground. As the wire is made of copper, the earth wire provides a low The opposition in an electrical component to the movement of electrical charge through it. Resistance is measured in ohms. path to the ground. In the event of a fault, the live current passing through the case will follow this path to the ground instead of passing through a person.
Fuses
A fuse provides a built-in fail-safe to the electrical circuit for a device. The fuse contains a thin wire that will melt if the current gets too high. If there is a fault that causes the casing of the device to become live, a large current will flow through the low-resistance earth wire. This high current will cause the fuse to melt.
Once the fuse has melted, the circuit is broken and no more current flows through the device. This means the case of the device is no longer live and there is no more risk of electrocution.